<dfn id="w48us"></dfn><ul id="w48us"></ul>
  • <ul id="w48us"></ul>
  • <del id="w48us"></del>
    <ul id="w48us"></ul>
  • 思科認證網絡設計工程師CCDA認證考試要點

    時間:2024-06-28 08:43:51 思科認證 我要投稿
    • 相關推薦

    思科認證網絡設計工程師CCDA認證考試要點

      200-310 DESGN思科互聯網絡解決方案考試,考試時間為75分鐘,共有55-65道與思科CCDA®認證相關的考題。通過200-310 DESGN考試需要具備思科企業網絡架構網絡設計的基礎知識。獲得CCDA認證的專業人士能夠設計包括涉及為SMB或基礎企業園區及分支網絡提供LAN/WAN技術的可路由、可交換網絡架構及服務。

    思科認證網絡設計工程師CCDA認證考試要點

      1.0 Design Methodologies15%

      1.1 Describe the Cisco Design lifecycle – PBM (plan, build, manage)

      1.2 Describe the information required to characterize an existing network as part of the planning for a design change

      1.3 Describe the use cases and benefits of network characterization tools (SNMP, NBAR, NetFlow)

      1.4 Compare and contrast the top-down and bottom-up design approaches

      2.0 Design Objectives20%

      2.1 Describe the importance and application of modularity in a network

      2.2 Describe the importance and application of hierarchy in a network

      2.3 Describe the importance and application of scalability in a network

      2.4 Describe the importance and application of resiliency in a network

      2.5 Describe the importance and application of concept of fault domains in a network

      3.0 Addressing and Routing Protocols in an Existing Network20%

      3.1 Describe the concept of scalable addressing

      3.1.a Hierarchy

      3.1.b Summarization

      3.1.c Efficiency

      3.2 Design an effective IP addressing scheme

      3.2.a Subnetting

      3.2.b Summarization

      3.2.c Scalability

      3.2.d NAT

      3.3 Identify routing protocol scalability considerations

      3.3.a Number of peers

      3.3.b Convergence requirements

      3.3.c Summarization boundaries and techniques

      3.3.d Number of routing entries

      3.3.e Impact of routing table of performance

      3.3.f Size of the flooding domain

      3.3.g Topology

      3.4 Design a routing protocol expansion

      3.4.a IGP protocols (EIGRP, OSPF, ISIS)

      3.4.b BGP (eBGP peering, iBGP peering

      4.0 Enterprise Network Design20%

      4.1 Design a basic campus

      4.1.a Layer 2/Layer 3 demarcation

      4.1.b Spanning tree

      4.1.c Ether channels

      4.1.d First Hop Redundancy Protocols (FHRP)

      4.1.e Chassis virtualization

      4.2 Design a basic enterprise network

      4.2.a Layer 3 protocols and redistribution

      4.2.b WAN connectivity

      4.2.b(i) Topologies (hub and spoke, spoke to spoke, point to point, full/partial mesh)

      4.2.b(ii) Connectivity methods (DMVPN, get VPN, MPLS Layer 3 VPN, Layer 2 VPN, static IPsec, GRE,VTI)

      4.2.b(iii) Resiliency (SLAs, backup links, QoS)

      4.2.c Connections to the data center

      4.2.d Edge connectivity

      4.2.d(i) Internet connectivity

      4.2.d(ii) ACLs and firewall placements

      4.2.d(iii) NAT placement

      4.3 Design a basic branch network

      4.3.a Redundancy

      4.3.a(i) Connectivity

      4.3.a(ii) Hardware

      4.3.a(iii) Service provider

      4.3.b Link capacity

      4.3.b(i) Bandwidth

      4.3.b(ii) Delay

      5.0 Considerations for Expanding an Existing Network25%

      5.1 Describe design considerations for wireless network architectures

      5.1.a Physical and virtual controllers

      5.1.b Centralized and decentralized designs

      5.2 Identify integration considerations and requirements for controller-based wireless networks

      5.2.a Traffic flows

      5.2.b Bandwidth consumption

      5.2.c AP and controller connectivity

      5.2.d QoS

      5.3 Describe security controls integration considerations

      5.3.a Traffic filtering and inspection

      5.3.b Firewall and IPS placement and functionality

      5.4 Identify traffic flow implications as a result of security controls

      5.4.a Client access methods

      5.4.b Network access control

      5.5 Identify high-level considerations for collaboration (voice, streaming video, interactive video) applications

      5.5.a QoS (shaping vs. policing, trust boundaries, jitter, delay, loss)

      5.5.b Capacity

      5.5.c Convergence time

      5.5.d Service placement

      5.6 Describe the concepts of virtualization within a network design

      5.7 Identify network elements that can be virtualized

      5.7.a Physical elements (chassis, VSS, VDC, contexts)

      5.7.b Logical elements (routing elements, tunneling, VRFs, VLANs)

      5.8 Describe the concepts of network programmability within a network design

      5.8.a APIs

      5.8.b Controllers

      5.8.c Application Centric Infrastructure (ACI)

      5.9 Describe data center components

      5.9.a Server load balancing basics

      5.9.b Blocking vs. non-blocking Layer 2

      5.9.c Layer 2 extension

    【思科認證網絡設計工程師CCDA認證考試要點】相關文章:

    思科認證CUWSS考試要點08-02

    思科認證CLDFND考試要點07-19

    思科認證ARCH考試要點08-15

    思科認證SIMOS考試要點09-06

    思科認證考試認證體系08-26

    思科網絡工程師認證考試09-03

    思科認證網絡工程師CCNA安全認證考試大綱08-22

    思科工程師認證考試09-13

    思科網絡工程師認證考試方法07-22

    思科認證CCNA認證考試簡介06-08

    主站蜘蛛池模板: 国产精品香港三级国产AV| 99久久精品毛片免费播放| 国产亚洲精品岁国产微拍精品| 国产精品自在线拍国产手机版| 国产麻豆一精品一AV一免费| 青青热久久国产久精品| 国产精品99久久久久久宅男| 55夜色66夜色国产精品视频| 亚洲AV日韩精品久久久久| 国产精品自在拍一区二区不卡| 精品国产_亚洲人成在线高清| 四虎成人精品在永久在线| 国产精品无码一区二区在线观一| 国产精品久久久久影院嫩草| 乱精品一区字幕二区| 亚洲午夜成人精品电影在线观看| 精品久久久久久无码免费| 成人国产精品日本在线观看| 97久久久精品综合88久久| 欧美精品欧美人与动人物牲交 | 四虎国产精品永久地址入口| 精品欧美激情在线看| 国产AV国片精品一区二区| 四虎精品影院4hutv四虎| 国产一精品一av一免费爽爽| 992tv精品视频tv在线观看| 精品视频无码一区二区三区| 亚洲AV永久纯肉无码精品动漫| 一区二区三区精品高清视频免费在线播放| 久久精品二区| 麻豆精品国产自产在线观看一区| 精品成人一区二区三区四区| 国产三级精品久久| 精品午夜福利1000在线观看| 国产乱人伦偷精品视频免观看| 国内精品伊人久久久久网站| 国产伦精品一区二区三区视频猫咪| 国产乱子伦精品免费视频| 久久免费99精品国产自在现线| 日韩精品免费一线在线观看| 无码日韩精品一区二区人妻 |